Masonry Solution

Rules for proper performance of face brick lining in this article you will find answers to questions such as what the solution should be chosen when the veneer face brick cottage, how to correctly perform masonry work and seams, what mistakes to avoid, etc. Storage of facing brick on the building site must be stored in a dry place, protected from the pollution solution, resin, concrete and other substances that are difficult or impossible to make to correct spot. Implementation of the solution choice of solution depends on the properties of brick, water absorption of bricks. It is best to use ready-made brick solutions called "two in one", while acting as a filler weld. In deciding to prepare a solution on their own are encouraged to: use a cement brand PC 500 with no additives, use sand and water, containing water-soluble salts, use the "hard" solution, avoiding excessive dilution with water (the consistency of wet land) to use for laying freshly prepared solution, is strictly prohibited apply lime. Masonry work during masonry work, always use the bricks from different trays at least three - this will allow you to avoid such unpleasant things as "spot" of another color on the background of the brickwork. Do not carry out masonry work in the rain and cold.

Do not allow the leakage of the solution of the seams on the front surface of the wall. Do not allow freezing of the unfinished masonry: the impossibility of erecting the roof before frost - cover necessarily erected walls for the winter ruberoydom or foil to prevent water from entering the brick and masonry joints in zamokaniya. For the erection of fences is recommended to use fine blocks. New folded wall within 14 days Protect from wetting, covering the waterproof film. Perform welds and seams Masonry work can be performed using one type of solution, if it simultaneous solution for masonry and joints.