11/22/2011

Roofing Funnels

Roofing funnel of the company "Suchasn Zhitlov Tehnolog VTK", used in construction of capital or partial repair of various flat unexploited and exploited single-level and multi-level, including including inverted roofs with any hydro, thermal insulation and vapor barrier materials, with the "pie" of any thickness and filling. Used for direct mounting with steel, cast iron or plastic pipes. Designed to collect rainwater and wastewater and meltwater from the surface of roofing. To prevent freezing of water in the receiving hole in the transitional seasons (autumn-winter-spring), ALL Roofing funnel LLC "Suchasn Zhitlov Tehnolog VTK" can be equipped with a heating system. The heating system includes a rim lock, which fits in a self-regulating cable and attaches it to the body of the funnel. Used self-regulating cable with a working voltage of 220V, 15W power change its heat output depending on ambient temperature. To limit the heating and energy saving recommended to connect self-regulating cable, a thermostat that works in the temperature range from -5 to +5 C. Otherwise, the heating is carried out at lower temperatures below zero, that is not required, since during cold snow on the roof does not melt and there is no need for water drainage.

Just a funnel of the company "Suchasn Zhitlov Tehnolog VTK" can be equipped with gaskets on surfaced or adhesive polymer-modified bituminous materials, or the membrane. If necessary, create two or more layers of vapor barrier / waterproofing, drainage water from several levels, the use of funnels of the company "Suchasn Zhitlov Tehnolog VTC "on the inversion, the exploited," green "roofs, it is necessary to use additional elements of the company" Suchasn Zhitlov Tehnolog VTC ": the ring of the drain, a pipe extension, extension, without steel clamping flange, clamping strip with a steel flange, drain with grille, stainless steel or cast iron, the transition 110/125, 110/160. For roofs with no possibility of placing the vertical risers drainage systems are offered with a horizontal funnel outlet diameter D110. TU 5285-001-95431139-2007 1. Specifications: diameter of the hopper - 220 mm-diameter tube receiver-DN 100 (DN 110) pipe length - 102/600 mm 2.Prizhimnoy Flange - Stainless Steel 3.Ekspluatatsionnye conditions: t -50 C +90 C 4.Propusknaya at 8 l / sec.
Nov 22, 2011 7:33:50 PM

Verify your Comment

Previewing your Comment

Posted by:  | 

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Leave a comment

(URLs automatically linked.)

Your Information

Name and email address are required. Email address will not be displayed with the comment.

NEXT POST
Plates Primaplex: Professional Insulation In the harsh Russian climate is good, reliable insulation of the building - an important factor ensuring a comfortable stay in an apartment building, industrial building or in any other room. Today at Russian market has no shortage of such materials. At the same time domestic production is often in no way inferior to foreign analogues. One such material - boards Primaplex, which are manufactured from extruded polystyrene. They are used for thermal insulation of walls, roofs and underground structures. Extruded polystyrene foam structure is a system of tiny isolated cell filled with a fixed carbon dioxide. Such a system makes the board more moisture resistant than any other type of insulation, and provides them with high strength. This is particularly important for structures with extremely high loads - such as underground structures deep foundations, airports, roads, etc. Another advantage of the plates Primaplex - low density (30-35 kg/m3), which makes the material very easy to use - the weight of the standard package does not exceed 10 kg. It is easy to cut, even knife or a saw, does not crumble and is not dusty, in contrast to other known insulating materials. Its easy to lay on any surface, which increases productivity by installing insulation. Allowable temperature range at which you can use the board - from - 50 C to +75 C. If he complied with the operation of facilities, the geometric dimensions of styrofoam remain unchanged for many years. Finally, the plates Primaplex, comprising an effective extinguishing additive flame retardants, are class and not readily flammable material spreading flames. If plates are used in fire safety (for example, insulating basement walls or pavement), it is recommended to use the version without the additives retardants. Thermal insulation of walls is well known that through the exterior walls out...
PREVIOUS POST
Getting To Work On Wood Mechanical properties of wood mechanical strength of wood depends on many factors: species, structure, bulk density, temperature, humidity, etc. The voltage corresponding to the maximum load is tensile strength. The elastic modulus of wood along the grain, regardless of the breed it is taken in determining the deformation of structures that are protected from moisture and heat and are under the influence of constant and temporary loads E = 100 000 kg/cm2. With increased humidity and temperature "under the influence on the design of only a constant load value of the modulus of elasticity is taken as the product of the above values for the following factors: the short-term wetting of wood, with subsequent drying - 0.85, established under the influence of air temperature in the range of 35 to 50 (for example, in manufacturing plants), as well as the impact constant load - 0.80. The heterogeneity of the structure of wood and its relation to the properties of the various factors make it difficult to study its mechanical properties. A significant factor in the mechanical testing of wood is the impact of loading rate. The faster rising load, the greater is the tensile strength. On the other hand, this limit is reduced under long-term loads. At keeping the sample under load there is a gradual increase in strain, which eventually stopped (attenuated) when the load is not (over a certain limit. When the load is removed part of the deformation disappears and the the other is gradually reduced (attenuated). This phenomenon is called the elastic aftereffect, and the load limit, beyond which the phenomenon is not observed, called the limit of long-term strength of wood. Getting Started work on wood Wood - a unique material. It is very easy to process. In addition, it is durable and very lightweight...

jonahsamson

The TypePad Team

Search

Recent Comments